Peculiarities of Neurostimulation by Intense Nanosecond Pulsed Electric Fields: How to Avoid Firing in Peripheral Nerve Fibers

Intense pulsed electric fields (PEF) are a novel modality for the efficient and targeted ablation of tumors by electroporation. The major adverse side effects of PEF therapies are strong involuntary muscle contractions and pain. Nanosecond-range PEF (nsPEF) are less efficient at neurostimulation and can be employed to minimize such side effects. We quantified the impact of the electrode configuration, PEF strength (up to 20 kV/cm), repetition rate (up to 3 MHz), bi- and triphasic pulse shapes, and pulse duration (down to 10 ns) on eliciting compound action potentials (CAPs) in nerve fibers. The excitation thresholds for single unipolar but not bipolar stimuli followed the classic strength–duration dependence. The addition of the opposite polarity phase for nsPEF increased the excitation threshold, with symmetrical bipolar nsPEF being the least efficient. Stimulation by nsPEF bursts decreased the excitation threshold as a power function above a critical duty cycle of 0.1%. The threshold reduction was much weaker for symmetrical bipolar nsPEF. Supramaximal stimulation by high-rate nsPEF bursts elicited only a single CAP as long as the burst duration did not exceed the nerve refractory period. Such brief bursts of bipolar nsPEF could be the best choice to minimize neuromuscular stimulation in ablation therapies.     

Nanocarriers for Biomedicine: From Lipid Formulations to Inorganic and Hybrid Nanoparticles

Encapsulation of cargoes in nanocontainers is widely used in different fields to solve the problems of their solubility, homogeneity, stability, protection from unwanted chemical and biological destructive effects, and functional activity improvement. This approach is of special importance in biomedicine, since this makes it possible to reduce the limitations of drug delivery related to the toxicity and side effects of therapeutics, their low bioavailability and biocompatibility. This review highlights current progress in the use of lipid systems to deliver active substances to the human body. Various lipid compositions modified with amphiphilic open-chain and macrocyclic compounds, peptide molecules and alternative target ligands are discussed. Liposome modification also evolves by creating new hybrid structures consisting of organic and inorganic parts. Such nanohybrid platforms include cerasomes, which are considered as alternative nanocarriers allowing to reduce inherent limitations of lipid nanoparticles. Compositions based on mesoporous silica are beginning to acquire no less relevance due to their unique features, such as advanced porous properties, well-proven drug delivery efficiency and their versatility for creating highly efficient nanomaterials. The types of silica nanoparticles, their efficacy in biomedical applications and hybrid inorganic-polymer platforms are the subject of discussion in this review, with current challenges emphasized.     

Hypoxia in the Baltic Sea and basin-scale changes in phosphorus biogeochemistry

Deep-water oxygen concentrations in the Baltic Sea are influenced by eutrophication, but also by saltwater inflows from the North Sea. In the last two decades, only two major inflows have been recorded and the lack of major inflows is believed to have resulted in a long-term stagnation of the deepest bottom water. Analyzing data from 1970 to 2000 at the basin scale, we show that the estimated volume of water with oxygen, <2 mL L(-1), was actually at a minimum at the end of the longest so-called stagnation period on record. We also show that annual changes in dissolved inorganic phosphate water pools were positively correlated to the area of bottom covered by hypoxic water, but not to changes in total phosphorus load, thus addressing the legacy of eutrophication on a basinwide scale. The variations in phosphorus pools that have occurred during the past decades do not reflect any human action to reduce inputs. The long residence time and internally controlled variation of the large P pool in the Baltic Sea has important implications for management of both N and P inputs into this eutrophicated enclosed basin.     

Comparison of the effectiveness of four linearizing techniques used in SiGe HBT LNA at 1900 MHz and low-bias voltage

In this article, four linearizing techniques are compared with each other when they are used in a common-emitter SiGe HBT LNA. Finally, when all of them are employed together, improved linearity of the LNA is observed and more than 10 dBm of IIP3 and −5 dBm of 1-dB gain input compression point are realized when the circuit is fed with 2.4 V. © 2004 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14, 144–152, 2004.     

Research on orotron oscillator with dispersive open resonant system

Theoretical and experimental results of an investigation into a new resonant system have been obtained. This system is named the sphere-corner-echelette open resonator (SCEOR) due to the employment of a mirror that was formed by two echelettes at the angles of 45° to the resonator axis. It turns ont that this resonator is excited on the specific modes not unique to others oscillating systems. There are presented the results of the experimental research of the orotron oscillator with the SCEOR. The spectrum of this device contains only the fundamental modes such as theT E M ₀₀₆,T E M ₀₀₇,T E M ₀₀₈. The efficiency of the orotron is improved, when all other factors are the same the orotron with a much used sphere-cylindrical open resonator.     

On the structure and properties of high-nitrogen low-carbon non-austenitic steels

Phase transformations, when cooling and heating non-austenitic high-nitrogen low-carbon steels containing chromium and other alloying elements, as well as structure and mechanical properties of these steels were analyzed. It was confirmed that these steels have high temperature chromium diffusion controlled pearlitic type transformation and martensitic type transformation. Experimental high nitrogen steels after quenching and tempering provide mechanical properties of about the same level as high strength commercial alloyed steels. Features of nitrogen as an alloying element in steels discussed allow the supposition of a possible reduction of the consumption of nickel, manganese, molybdenum or tungsten in high strength alloyed steels.     

The optical absorption edge of rare earth sesquisulfides and alkaline earth - rare earth sulfides

Optical band gaps were measured by diffuse reflectance spectroscopy on a series of Ln₂S₃ compounds of α, δ, ε and τ structure types and on a series of ternary sulfides MLn₂S₄ (M = Sr, Cd, Mg) of Th₃P₄, CaFe₂O₄ and spinel structure types. Sharp absorption edges are observed with band gaps ranging from 2.2 to 3.5 eV. Systematic changes occur with rare earth radii. Analysis of some of the absorption edges suggests direct forbidden transitions.     

Flow stress,subgrain size,and subgrain stability at elevated temperature

Well defined subgrain boundaries dominate the microstructural changes occurring during plastic flow of polycrystalline metals at elevated temperature. The quantitative influence of subgrain size on elevated-temperature plastic flow is considered. Based on the results of tests under constant-stress and constant-structure conditions, an equation is developed which predicts the creep rate as a function of subgrain size, stress, diffusion coefficient, and elastic modulus. In general, the subgrain size is a unique function of the current modulus-compensated flow stress, but if fine subgrains can be introduced and stabilized, large increases in creep strength may result. The applicability of the phenomenological relation developed to the behavior of dispersion-strengthened materials (where the second-phase particles may predetermine the effective subgrain size) is discussed. When subgrain effects are included, it is shown that the creep rate is less dependent on stacking fault energy than has been previously thought. This paper is based on a presentation made at a symposium on “Mechanical-Thermal Processing and Dislocation Substructure Strengthening,” held at the Annual Meeting in Las Vegas, Nevada, on February 23, 1976, under the sponsorship of the TMS/IMD Heat Treating Committee.     

Volt-Watt Sensitivity of Semimetal <Emphasis Type="Italic">BiSb</Emphasis> Film Thermocouple Sensors in the 8 mm Wavelength Range

The paper considers the experimental and analytical data on volt-watt characteristics of metal-semimetal BiSb film point contacts in 8 millimeter wavelength range. Analytical expressions have been obtained for the volt-watt sensitivity and the resistance of the metal-semimetal BiSb film point contacts. A thermoelectric millimeter wave range detector has been designed on the basis of the sensors; the performance is illustrated by experimentally determined volt-watt relations.